Monday, March 03, 2008

11 How a Clipless Pedal Works

Hey! Want to say screw off to your enemy at the races?

Yes, just do it. Screw off.

No no no hold it! Hold it ... I didn't mean THAT!!

I meant : Take a screw off his pedal cleat when he isn't looking. Literally.

Well, I'll come back to this in a sec. First lets see how a clipless bicycle pedal works. All the nerdy wordy descriptions aside, I'll let you look more at pictures.

This is the Shimano PD-520 Pedal, a set of 3 year old beaters I have on my fixed gear. This version is made in Malaysia.


1 and 2 are the clipping sites for the cleat, something you attach to the back of your shoe. 3 is the body, 4 the spindle, and 5 is the threading that fastens into a crank arm clearance.

Member 2 is able to move back and forth (black arrows below), whose resistance to do so is set by tensioning a torsional spring 6.


As one rotates an adjustment screw clockwise (purple arrow), the black spring 6 moves outward shown by the red arrows, clamping member 2 at its outer arms more tightly. The result is that it becomes harder to clip in and clip out. This is handy if you want a more secure attachment. Some people's feet accidently clip out while climbing hills or sprinting.
Now to the cleat that attaches to the bottom of your cycling show. It looks like this, without screws :


Oooh , look at that beaten up sole, will you? The carbon footprint (no pun intended) explains everything about the bicycle racer - how his foot reacted when he clipped in for the first time, how he fell, this rebellious war between untrained feet and machine element.

By radio isotope dating and measuring the amount of C-14, cycling experts can take the sole and test its age to know when the racer actually began pursuing this crazy interest.

Naaa, joking.

Anyway, the assembly taken apart looks like this :


Observe 3 members. The first one in order at the top is what clips into the member 2 on the pedal.

To show you a cutaway of how this happens, I had to use bare arm strength to clip the right cleat into the right pedal. The turning motion (purple arrow) is actually provided by your feet. You clip one portion of the cleat into the immovable member 1 of the pedal and rotate the ankle of your feet so that the other part of the cleat displaces the moving member 2 (red arrows) to clip in. The difficulty of clipping in is again dictated by the spring tension 6 as mentioned above.




To clip out of the pedal, your ankle does the exact opposite!



Now observe that two screws are used to fasten the cleat onto the SPD compatible holes in your shoe. Say that one of these screws went missing. This could happen due to insufficient tightening and consequent loss while on a ride, or deliberate horseplay.

Then there only remains one screw. One screw WILL NOT be able to ensure proper fastening to the holes in the shoe sole. Say also that the spring tension is set to HIGH making it even harder to unclip.

A clipped-in rider, unaware of this situation and then attempting to unclip by twisting his foot will not unclip after repeated attempts. This is because the cleat turns with the pedal. The relative motion between the two is almost zero!

He may be able to use some superhuman strength to twist his feet so much that the remaining screw unfastens but this is unlikely while on the bike. I mean, its difficult to do. Even if its possible, chances are you could damage the sole of the shoe.

This gentlemen, is screwing-off.



P.s : Don't try to harm anyone with this ploy. :) The post is meant to show why its important to ensure your cleat screws are sufficiently tight before riding.

To handle this situation, its advisable to unclip other feet, get off the bike, remove your feet from the shoe in question, while having the bike supported (maybe by a friend). Once you have your feet off, use an Allen key from your multi-tool to set the tension on the spring low (if possible) and free member 2 of pedal using the Allen key as a lever. This will get the shoe off from the pedal. Its easier to do all this with the pedal removed from the crank arm using a wrench.


Speaking of which, SPD pedals aren't really known for their float (degree to which you can rotate feet while clipped in for natural movement). Removing a screw from the cleat may be a way to "engineer" float. Funny...

11 comments:

  1. Good post Ron. I have been wondering how much pedal stack height really affects pedaling efficiency. Any advice on that?

    ReplyDelete
  2. Chris,

    Thats a good question. You know what.. looking at all the variations of pedals we have today, any minute difference in pedal
    stack height is going to bring one very neglibable performance gains, if there exists any. I can't think of one :)

    If I would worry about anything more, it would be CLEAT positioning relative to the pedal axis. Some like the center of the ball of the feet to be directly over the axis, I keep mine slightly ahead of the axis, maybe by a few millimeters. Playing around with this setting ensures proper pedal leverage, which I think is more important that any stack height difference.

    Its important to spread the pedaling forces over the musculature of the glutes,quads and the calves. If your calves are playing a bigger role trying to stabilize the ankle, thats not very efficient metabolically and neurologically.

    ReplyDelete
    Replies
    1. Anonymous4:08 PM

      "neurological [ˌnjʊərəˈlɒdʒɪkəl]
      adj
      (Medicine) of or relating to the nervous system or neurology"

      "neu·rol·o·gy (n-rl-j, ny-)
      n.
      The medical science that deals with the nervous system and disorders affecting it."

      "Thats not very efficient metabolically and neurologically." really dude?

      Delete
  3. Ron - when I got fitted by WobbleNaught, they recommend a cleat position based on bone measurements. I couldn't adjust my cleats far enough toward the arch of my foot to achieve that position. I have been seeing some information that suggests the ball of the foot is not an optimum position.

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. Chris,

    Only you'll know at best what is good. For me, I'm sensitive to my gastrocnemius (calf muscle) stabilizing ankle when the ball of the foot is directly over the axis. I figured in the long term, setting the cleat slightly behind the ball might avoid injury or any potential discomfort. A couple of millimeters at best is good. The big picture here is to help your feet take care of ONLY powering the bike instead of taking care of wasted motions.

    Maybe some other experts might help you better?

    ReplyDelete
  6. Anonymous10:04 PM

    Good description and diagrams, Ron.

    A question: Is there any research that shows scientifically that pedalling with the clipless delivers more power, or is more efficient, than pedalling without the clipless, that is with the shoes resting freely on the pedals. For example, a test could measure the heart rate, or human energy expended, under fixed peddling or spinning conditions with and without clipless pedals.

    Thanks
    Peter MSweeney

    ReplyDelete
  7. Anon,

    Good question. I will let you know if I find something. I will tell you though that clip less is more efficient since it harnesses the pulling power of the hamstrings in the upstroke phase of pedaling. Its way better than simply mashing the pedals on way if you know what I mean.

    ReplyDelete
  8. Hi
    I have a wide foot EEEEE and it is flat 47mm. I would like some options for clipless pedal that would be wider than normal. Also have one side to use as a normal pedal.
    My toes keep going numb. I ride with a stiff soled hikeing shoe.

    ReplyDelete
  9. This comment has been removed by a blog administrator.

    ReplyDelete
  10. Anonymous3:01 PM

    I always wondered how clipless mechanism works. It’s practically impossible to find this information in the Internet. And only at your site I finally found it. Now I know how it works. Thank you so much!!!

    ReplyDelete

Thank you. I read every single comment.